Technical Clamp Table

FLIR CM174 is able to identify problems that ordinary clamp tables cannot detect. FLIR CM174 uses IGM infrared imaging guided measurement technology to integrate FLIR Lepton® thermal imaging sensors, providing a reliable way to identify hot spots and overload circuits within a safe distance. Infrared imaging guided measurement technology clearly guides you to discover the exact location of potential electrical problems, helping you confirm discovery results with rich features and temperature readings.

Discover problems more quickly

It can quickly identify problems without direct contact with distribution cabinets and electrical cabinets or messy wires and cables that may have safety concerns.

Confirm Discovery Results

Confirm the problem, check the load, validate the hotspot. Gets accurate current and voltage readings as well as center point readings.

Solve complex electrical problems

CM174 is designed to be intelligent, with its slender clamps and built-in lighting to facilitate the detection of low-light, difficult to reach locations. Electrical performance allows you to obtain the required readings (including true effective values, low impedance inputs, frequency conversion measurement modes, inrush currents, smart diode measurements) to quickly resolve problems. In addition, the AC current measurement range can be extended to 3000 amperes by using FLIR flexible current forceps.

The company sells portable thermal imaging cameras, thermal imaging cameras,Infrared Imaging instrumentAnd other products, welcome to inquire.

Infrared resolution 80x60 (4,800 pixels)

Sensitivity More than mK

Dimensions (lengthX Width × height) 43x89x241 mm

Warranty 10 Machine and Detector warranty

Weight 426 g

Lighting Support

Measurement data

Auto shutdown Support

Auto Switch Range Supported, with manual range options

Measurement & amp; analysis

Communication/DC Voltage Range1000V/Basic Accuracy ±1.0%

Capacitance Range1000µF/Basic Accuracy ±1.0%

Diode Range1.5V/Basic Accuracy ±1.5%

Inrush AC Current Range600.0A/Basic Accuracy ±3.0%

Low impedance input mode AC voltage Range1000V/Basic Accuracy ±1.0%

Low impedance input mode DC voltage Range1000V/Basic Accuracy ±1.0%

Resistance Range6000Ω/Basic Accuracy ±1.0%

Temperature accuracy ±3°C or readings of ±3%

Temperature range -25°C to the

Frequency Conversion AC Current Range600.0A/Basic Accuracy ±2.0%

Frequency Conversion AC Voltage Range1000V/Basic Accuracy ±1.0%

Guide conductivity Inspection 600Ω

True valid value Support

Guide conductivity Check Threshold 30Ωto 150Ω

Imaging & amp; optics

Palette Iron red, rainbow color, grayscale

Display size 2.0-inch TFT screen

Focusing Fixed

Thermal imaging Detectors FLIR Lepton® Micro-measurement of radiant heat meter

Field of view angle[Vertical x Level] 38.6°x50.0°

Storage media

Data logging and storage Not applicable

Power

Battery 4 AAA batteries; optional TA04 Lithium Polymer Rechargeable battery

Environmental parameters

Anti-drop test 2 m

Launch Rate settings With custom adjustments4 Preset values

Connectivity & amp; communication

Connectivity Not applicable

Performance

Measurement rate Per second3 samples