Optical gas Thermal Imaging camera
FLIR GF306 Optical gas thermal imaging cameras visualize six sulphur fluoride (SF6) and other gas leaks in the normal operation of the facility. SF6 is used in the power industry as an insulator and quenching medium for gas-insulated substations and circuit breakers. The portable contactless FLIR GF306 allows you to quickly scan the substation for leak problems while maintaining a safe distance from the high-voltage equipment. By detecting leaks early, GF306 can effectively reduce loss of revenue due to failure and maintenance.
Block leaks. Increase uptime to a large extent.
Increased efficiency
FLIR GF306 detection speeds are significantly higher than traditional leak detection tools, capable of detecting SF6, anhydrous ammonia (NH3) and ethylene (C2H4).
Integrated Preventive Maintenance
FLIR GF306 can accurately measure temperatures up to 500 ℃, making it a great choice for preventive maintenance works at facilities.
Save gas and avoid loss of income
Reduce revenue loss by efficiently detecting gas leaks from safe distances away from high-pressure areas.
The company sells portable thermal imaging cameras, thermal imaging cameras,Imaging instrumentAnd other products, welcome to inquire.
Detector type Focal plane array, refrigeration type quantum trap infrared detector
Dynamic Range 14-bit real-time non-infrared video recording: Record to memory card in MPEG4/H.264 format (60 minutes per fragment) 3
Installation UNC 1/4 "-20
Packaging size 400x190x510 mm
Power AC Adapter 90-260Vac,50/60hz or 12V car power supply
Wavelength Range 10.3–10.7µm
Weight[Including lens and battery] 2.48 kg
Zoom 1 – 8 times times Continuous digital zoom
Size[Length × width x height] (including lens) 305x169x161 mm
Measurement & amp; analysis
Precision ±1°C (temperature between 0-100°C) or ±2% of reading (temperature >+100°C)
Thermal sensitivity (NETD) <15 mk="" at="">
Temperature range -40°C to +500°C
Automatic Gain Control Continuous/Manual, Linear, histogram
Shock resistant/Vibration Resistant G (IEC 60068-2-27)/2 G (IEC 60068-2-6)
Imaging & amp; optics
Thermal Imaging Camera Control PassUSB for remote thermal imaging camera control
Thermal Imaging camera Aperture number F/1.5
Palette Iron red, grey, rainbow Color, Aurora color, lava color, high contrast rainbow color
Detector pixel Spacing 30µm
Field of view angle 14.5°x10.8°
Focusing Automatic (single-touch) or manual (electric or on camera)
Frame frequency[Full Window] $ Hz
Global Positioning System[GPS] Location data is stored with each image
Image mode Infrared image, visible image, high sensitivity mode (HSM)
Menu commands Level/Span, automatic adjustment of continuous/manual/semi-Automatic, zoom, palette, start/stop recording, storage image, playback/retrieval image
Resolution 320x240 pixels |
Sensor refrigeration Sterling Micro Cooler (FLIR MC-3)
Built-in Display Built-in widescreen,4.3-inch LCD display, 800x480 pixels
Video recording and transmission Real-time non-radiant video streaming:RTP/MPEG4
Visible Images 3.2 MP, from integrated visible light camera
Visible Video ToMPEG4 format (25 minutes per fragment) recorded to the memory card
Storage media
Image storage capacity >1200 images (JPEG), post-processing capability depends on memory card capacity
Power
Battery system Rechargeable Lithium-ion battery
Environmental parameters
Packaging IP (IEC 60529)
Operating Temperature range -20°C to +40°C
Storage Temperature Range -30°C to +60°C
Connectivity & amp; communication
Storage media RemovableSD or SDHC memory card; two card slots